pt Findotek
your reliable business partner
Contact : 

PT Findotek
Mail : manage@findotek.com
Tel : +62-21-8997 0350
WhatsApp : +62-8119202383


Ruko Notredame Blok G No. 19,
Deltamas, Cikarang Pusat,
Bekasi 17530, West Jawa,
Indonesia.

< toll road exit : Cikarang Pusat >

International Paint, Interlac 665, Interthane 990, Interseal 670 HS


We supply International marine paint, International protective paint (cat kapal International, Enviroline 225, sulphuric acid resistance lining, hydrochloric acid resistance lining, nitric acid resistance lining, caustic soda resistance lining, Intergard 251, Intergard 400, Intergard 475 HS, Intergard 740, Interseal 670 HS, Interprime 198, Intertuf 262, Interzinc 22, Interlac 665, Interline 850, Interplus 256, Interthane 990, Intertherm 50, Intertherm 875, Intertherm 891, Interspeed 376, Interspeed 6200, Interswift 6800 HS, Interzone 964, Interbond 201, Chartek 7, thinner GTA-733, others) in Jakarta, Serang, Cirebon, Tangerang, Bandung, Bogor, Tasikmalaya, Sukabumi, Cianjur, Garut, Bekasi, Karawang, Cikampek, Purwakarta, Indramayu, Cirebon, Cilacap, Semarang, Surakarta, Solo, Surabaya, Madura, Banyuwangi, Purwokerto, Tuban, Kediri, Tegal, Pekalongan, Gresik, Malang, Jember, Jepara, Merak, Lampung, Palembang, Prabumulih, Padang, Pekanbaru, Batam, Medan, Lhokseumawe, Aceh, Bengkulu, Jambi, Dumai, Riau, Bangka Belitung, Sumatra, Denpasar, Bali, Balikpapan, Samarinda, Bontang, Banjarmasin, Pontianak, Kalimantan, Makassar, Bitung, Manado, Sulawesi and other parts of Indonesia (toko cat International, agen cat International, supplier cat International).

Below are some of our paint supplies :

Enviroline 225 : Sulphuric Acid & Hydrochloric Acid Resistance Lining

Solvent free, polycyclamine cured epoxy novolac lining with excellent resistance to 98% sulphuric acid, 37% hydrochloric acid, 5% nitric acid, ethanol, butyl acetate, caustic soda and other chemicals.

Colors : grey, green

Intergard 400 : Pure Epoxy Primer

A two pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods. A general purpose primer for all non-permanently immersed areas.

Colors : dark grey, light grey.

Intergard 740 : Epoxy Finish

A two pack epoxy finish to be used as cosmetic finish above waterline.

High gloss finish with colors : white, storm grey, red, signal green, black.

Interprime 198 : One Pack Alkyd Primer

A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes. It is used for maintenance of above water areas.

Matt finish with colors : white, grey, red.

Interseal 670 HS : Surface Tolerant Epoxy

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. Available in an aluminium pigmented version to provide additional anti-corrosive barrier protection.

For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.

Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.

Semi-gloss finish with varieties of colors

Intertuf 262 : Epoxy Anticorrosive Primer

A surface tolerant, two pack epoxy primer. As an epoxy anticorrosive coating for use from Keel to Rail. Suitable for use with controlled cathodic protection, at newbuilding, maintenance & repair or on board maintenance.

Matt finish with color red.

Interzinc 22 : Inorganic Zinc Rich Silicate Primer

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer that conforms to SSPC Paint 20 Level 1.

Available in ASTM D520, Type II zinc dust version as standard.

A zinc rich primer suitable for use with a wide range of high performance systems and topcoats in both maintenance and new construction of bridges, tanks, pipework, offshore structures and structural steelwork.

Provides excellent corrosion protection for correctly prepared steel substrates, up to temperatures of 540°C (1004°F) when suitably topcoated.

Fast curing primer capable of application in a wide range of climatic conditions.

Matt finish with color green grey.

Interlac 665 : One Pack Alkyd Gloss Finish

It is used as an easily maintained cosmetic finish coat on areas above the waterline at newbuilding, maintenance, repair or on board maintenance.

High floss finish with varieties of colors.

Interline 850 : Chemical Resistant Epoxy Phenolic Lining

A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

Interline 850 provides corrosion protection for the internals of steel storage tanks and pipes containing a range of products, including crude oil, unleaded gasoline blends, MTBE, jet fuels, caustic solutions, potable water and a selected range of aromatic and aliphatic solvents.

NSF Certification is for tanks of 1500 gallons (5679 litres) or greater and pipes 48 inches (122 cm) or greater in diameter.

Colors : white or grey

Interthane 990 : Acrylic Polyurethane Finish

A two pack, acrylic polyurethane finish giving excellent durability and long term re-coatability.

As a cosmetic finish on above water areas. Suitable for use on topsides, external superstructure, external decks and boottops.

For use at newbuilding, maintenance, repair or on board maintenance.

High gloss finish with color white, black & others

Intertherm 50 : High Temperature Silicone (up to 540°C)

Single component, high temperature coating based on moisture curing silicone binder. The moisture curing cross linking mechanism allows multiple coats to be applied without heat curing.

It is suitable for the protection of steel from corrosions on areas including flare stacks, chimneys, exhausts, vents and pipework, at temperature up to 540°C.

Colors : aluminum or black

Intertherm 875 : High Temperature Silicone Acrylic (up to 260°C)

A heat resistant finish based on silicone and acrylic resins.

Intertherm 875 has excellent colour and gloss retention and maintains flexibility at elevated temperatures.

It is suitable for the protection of steel surfaces subject to temperatures up to 260°C at newbuilding, maintenance, repair or on board maintenance.

Gloss finish with color blue and white.

Intertherm 891 – One Pack High Temperature Oleoresinous / Aluminum Coating

As a light reflective finish for cargo holds, pipes, etc. Intertherm 891 is suitable for use on surfaces that are likely to reach dry heat temperatures of up to 250°C (482°F). This may be extended up to 315°C (600°F) if the dry film thickness is reduced to 15 microns (0.6 mils).

It is suitable for use at newbuilding, maintenance, repair or on board maintenance.

Color available is aluminum only.

Interspeed 376 – TBT Free Antifouling Paint for Aluminum Vessel

TBT (tributyltin) free controlled depletion polymer (CDP) antifouling system.

It is suitable for use on aluminium vessels both at maintenance & repair.

Colors available are blue, white, red, black, dark grey.

Interspeed 6200 – TBT Free Self-polishing Antifouling Paint

TBT (tributyltin) free, controlled depletion polymer (CDP) self polishing antifouling system.

It is suitable for use at newbuilding, maintenance & repair.

In repair situations Interspeed 6200 can be applied directly over existing antifoulings.

Colors are available in red & brown.

Interswift 6800 HS – TBT Free, Low Friction, Self-polishing Copolymer Antifouling 

Patented, TBT free, low friction, self-polishing antifouling system incorporating unique Copper Acrylate SPC (Self-polishing Copolymer) technology.

It is suitable for use at newbuilding, maintenance & repair.

Colors available are blue, green, red, brown, black.

Interzone 954 : Splash Zone Coating, Splash Zone Paint, Tidal Zone Coating

Splash zone coating (paint) - Interzone 954 is primarily designed for use in offshore splash zone, tidal zone maintenance. This is because splash zone coating (paint) – Interzone 954 can be applied onto reoxidised and slightly damp surfaces. After application, this splash zone coating (paint) can continue its full curing under water (submerged conditions).

Interzone 954 coating has also excellent cathodic disbondment resistance and performs well under corrosive environments like in the pulp and paper industries, chemical plants, jetties and slice gates.  

Gloss finish with colors : grey, green.

Interbond 201 : Hard Wearing Epoxy Primer / Finish

A hard wearing, surface tolerant, two pack epoxy primer / finish offering corrosion protection in one coat. 
Used as an anti-corrosive primer / finish for decks, deck fittings and cargo holds; for maintenance & repair, on board maintenance.
Semi-gloss finish with colors : signal green, red, storm grey, surf grey.

Chartek 7 : Fireproofing Coating, Fireproofing Paint, Fire Protection Coating

Fireproofing coating (fire proofing paint, fire protection coating) – Chartek 7 is an epoxy intumescent fire protection system featuring excellent jet fire resistance, lower applied density and an easier application process.

Fireproofing coating (fire proofing paint, fire protection coating) – Chartek 7 is the highest qualified and most cost efficient product for jet fire protection on the market.

Jet fire protection coating (fire proofing paint, fire protection paint) – Chartek 7 is certified by ABS, Lloyd’s, listed by Underwriters Laboratories and NORSOK M-501 tested.

Chartek 7 is fully fired rate for offshore platform applications. This fire protection coating is easy to apply by a variety of techniques, hard, durable and flexible.

This fire protection coating is virtually maintenance free – even in the harshest climatic conditions.

This fireproofing coating (fire protection paint) is tough, durable, water resistant and virtually maintenance free.

This fireproofing coating (fire protection paint) provides long term fire protection suitable for offshore oil and gas facilities, onshore refineries and chemical processing plants.

Please contact us for supply of International marine paint (cat kapal International, Enviroline 225, sulphuric acid resistance lining, hydrochloric acid resistance lining, nitric acid resistance lining, caustic soda resistance lining, Intergard 251, Intergard 400, Intergard 475 HS, Intergard 740, Interseal 670 HS, Interplus 256, Interprime 198, Intertuf 262, Interzinc 22, Interlac 665, Interline 850, Interthane 990, Intertherm 50, Intertherm 875, Intertherm 891, Interspeed 376, Interspeed 6200, Interswift 6800 HS, Interzone 964, Interbond 201, Chartek 7, thinner GTA-733, etc) in Jakarta, Bandung, Bogor, Cianjur, Sukabumi, Garut, Tasikmalaya, Bekasi, Karawang, Cikampek, Indramayu, Tangerang, Serang, Cilegon, Cirebon, Cilacap, Semarang, Surakarta, Solo, Surabaya, Madura, Banyuwangi, Purwokerto, Purwakarta, Tasikmalaya, Tuban, Tegal, Gresik, Pekalongan, Malang, Jember, Jepara, Merak, Lampung, Palembang, Padang, Pekanbaru, Batam, Medan, Lhokseumawe, Aceh, Bangka Belitung, Denpasar, Bali, Bengkulu, Jambi, Riau, Dumai, Sumatra, Balikpapan, Samarinda, Bontang, Banjarmasin, Pontianak, Kalimantan, Makassar, Manado, Bitung, Sulawesi and other parts of Indonesia (toko cat International, agen cat International, supplier cat International).

Website Builder