pt Findotek
your reliable business partner


Contact : 


PT Findotek
Mail : manage@findotek.com
Tel : +62-21-8997 0350
WhatsApp : +62-8119202383
WeChat ID : sfwong111


Ruko Notredame Blok G No. 19,
Deltamas, Cikarang Pusat,
Bekasi 17530, West Jawa,
Indonesia.

< toll road exit : Cikarang Pusat >

Hempel Paint, Antifouling, Epoxy Coating, Marine Paint

We supply Hempel Paint, Hempel coating (antifouling, marine paint, Galvosil, Hempadur, Hempadur Avantguard, Glass Flake, Hempadur Mastic, Hempadur Quattro, Hempalin, Hempaquick, Hempatex, Hempathane, Hempaxane, Hempinol, Olympic, Novolac, Silvium, Versiline) in Jakarta, Bandung, Bogor, Cianjur, Sukabumi, Pelabuhan Ratu, Cilacap, Tasikmalaya, Bekasi, Karawang, Cikampek, Cirebon, Indramayu, Lamongan, Gresik, Tuban, Semarang, Surabaya, Malang, Jember, Yogyakarta, Solo, Banyuwangi, Tangerang, Serang, Anyer, Cilegon, Merak, Lampung, Palembang, Padang, Bengkulu, Jambi, Pekanbaru, Dumai, Bangka, Belitung, Batam, Medan, Lhokseumawe, Aceh, Sumatra, Bali, Balikpapan, Samarinda, Bontang, Banjarmasin, Pontianak, Sangatta, Makassar, and other parts of Indonesia.                                                                                                

                                                                                           

02220 Hempel’s Marine Varnish

It is a quick drying clear urethane alkyd finish for new wood, varnished wood both interior & exterior.

Color : clear                           packing : 5L can

 

05570 Hempel’s Tropaline PU Lacquer

It is a polyurethane varnish with excellent gloss retention & good resistance to abrasion, water, sunlight, weather & wear.

It is suitable for interior & exterior wood & other substrates.

Color : clear                            packing : 5L can

 

05990 Hempadur Sealer

It is a low viscosity epoxy varnish with good penetration properties.

It can be applied onto cleaned concrete surfaces before application of pigmented paints.

Color : clear                            packing : 5L can

 

08080, 08230, 08450, 08570, 08700, 0870M, 08710 – Hempel’s Thinner

 

10220 Hempinol

            – physically drying, high build bituminous coating

For economical short to medium term anti-corrosive protection of interior & exterior steel exposed to direct sunlight.

It is approved as a low flame spread material.

Color : black                            packing : 5L can; 20L pail

 

12050 Hempalin Primer

         – quick drying alkyd primer with zinc phosphate

For protection of steel in mild to medium atmospheric corrosive environments.

Max dry exposure 120 °C.

Color : brown; green               packing : 5L can; 20L pail

 

120SG Hempel’s Fast Drying Primer

          – urethane modified alkyd based

General purpose primer or intermediate for the protection of steel in mild to medium atmospheric corrosive environments.

Max dry exposure 120 °C.

Color : grey; green; red           packing : 5L can; 20L pail

 

13140 Hempel’s Uni-Primer

         – quick drying modified epoxy ester primer with zinc phosphate

A versatile primer on steel & metal surfaces in mild to medium corrosive atmospheric environment.

Max dry exposure 140 °C.

Color : red                               packing : 20L pail

 

13624 Hempaquick Primer

         – very quick drying zinc phosphate alkyd primer

A workshop primer for temporary protection & as a general purpose primer in fast drying alkyd based system in mild to medium atmospheric corrosive environments.

Color : grey; red.                     packing : 20L pail

 

136ID Hempel’s Primer

          - quick drying alkyd primer
It is an economical quick drying alkyd primer with red iron oxide pigment as corrosion inhibitor & free of Cu, Zinc, Pb & Tin.
General purpose primer for exterior & interior steel in mild to moderately corrosive marine & industrial atmosphere enviornment.

Color : black; grey; red.          packing : 20L pail

 

15275 Hempel’s Shopprimer E

          – zinc phosphate pigmented epoxy polyamide shopprimer

It is used a shop primer for protection of blast cleaned steel plate & other structural steel during the storage & building period.

Max dry exposure 140 °C.

Complies with European Fire Standard EN 13501-1; classification B-s1, d0.

Color : red.                              packing : 20L pail

 

15300 Hempadur Primer

         – epoxy primer containing zinc phosphate corrosion inhibiting pigment

It is used as a primer or intermediate coat in container systems.

Maybe used as a general purpose epoxy primer.

Max dry exposure 140 °C.

Color : grey; red.                     packing : 5L can; 20L pail

 

15341 Hempadur Zinc

          - polyamide cured zinc epoxy paint

It is for on-line application on containers.

Maybe used a zinc epoxy primer for other purposes.

Max dry exposure 140 °C.

Color : grey red.                      packing : 20L pail

 

15360 Hempadur Zinc

         – weather resistant polyamide cured zinc rich primer

It is for on-line application on containers.

Maybe used as a zinc rich epoxy primer for other purposes.

Approved as a welding primer by Lloyd’s Register of Shipping.

It complies to SSPC Paint 20, type 2, level 2 & ISO 12944-5.

Max dry exposure 160 °C.

Color : metal grey                   packing : 10L can

 

15400 Hempadur

          – chemical resistant amine adduct cured epoxy

It is used as a cargo tank lining.

Tested for non-toxicity of welding fumes by the Danish Welding Institute.

Tested according to section 175.300 of the Code of Federal Regulations Title 21 – Liquid Foodstuff.

Water wet surface temperature max 50 °C.

Max dry exposure 140 °C.

Color : white; light red             packing : 20L pail

 

15553 Hempadur

          – abrasion & impact resistant zinc phosphate epoxy paint

It is used a primer on hot dipped galvanized surfaces, aluminium & stainless steel in moderately corrosive environment.

Complies with European Fire Standard EN 13501-1; classification B-s1, d0.

Approved as a low flame spread material when used as part of a predefined paint system.

Complies with EU Directive 2004/42/EC: subcategory j.

Max dry exposure 140 °C.

Color : off white; red               packing : 20L pail

 

15570 Hempadur

         – highly corrosion resistant polyamide adduct cured epoxy paint

It is used as a maintenance & repair primer, intermediate, and or finishing coat in severely corrosive environment.

The micaceous iron oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces.

Complies with European Fire Standard EN 13501-1; classification B-s1, d0.

Approved as a low flame spread material when used as part of a predefined paint system.

Complies with EU Directive 2004/42/EC: subcategory j.

Max dry exposure 140 °C.

Color : grey; reddish grey       packing : 20L pail

 

15590 Hempadur

         – high abrasion resistant epoxy primer

It is used as a blast primer for heavy duty epoxy system on submerged & non-submerged areas.

Max dry exposure 140 °C.

Color : red                               packing : 20L pail

 

15700 Hempel’s Galvosil 

         – weathering, abrasion & chemical resistant inorganic zinc silicate primer.

It is solvent borne, self curing, inorganic zine silicate heavy duty rust preventing primer with excellent chemical resistance with pH range 6-9.

It also offers cathodic protection of local mechanical damage.

It complies with SSPC-Paint 20, type 1, level 1 and ISO 12944-5.

Resistant to dry temperature max 400 °C (cyclic); max 500 °C (non-cyclic).

Color : metal grey                   packing : 7.8L can

 

15780 Hempel’s Galvosil

         – medium zinc, inorganic zinc silicate general purpose primer

It is used as a general purpose rust preventing primer for steel exposed to moderately to severely corrosive environment.

It complies with SSPC-Paint 20, type 1, level 2.

Resistant to dry temperature max 400 °C (cyclic); max 500 °C (non-cyclic).

Color : metal grey                   packing : 10L can

 

15790 Hempel’s Galvosil 

         – medium zinc, inorganic zinc silicate general purpose primer

It is used as a general purpose rust preventing primer for steel exposed to moderately to severely corrosive environment.

It complies with SSPC-Paint 20, type 1, level 3.

Color : metal grey                   packing : 10L can

 

15890 Hempel’s Shop Primer ZS

         – solvent borne zinc ethyl silicate shopprimer

It is approved as welding primer / shopprimer for short to medium term protection of abrasive blast cleaned steel plates & other structural steel during storage, fabrication & construction periods.

Excellent resistance to weathering, oil & organic solvents, heat.

Complies to IMO MSC.215(82) as shopprimer for ballast tank coating systems.

Complies to IMO MSC.288(87) as shopprimer for cargo oil tank systems.

Max dry exposure 120 °C.

Color : metal grey                   packing : 15L pail

 

15ASG Hempel’s 15ASG

          – abrasion resistant, anticorrosive, pure epoxy primer

It is used a self-primed high performance coating system for atmospheric or in water service, including water ballast tanks; for tugs & barges.

Excellent anticorrosive & very good mechanical properties.

Max dry exposure 120 °C.

Color : black; brown                packing : 5L can; 20L pail

 

16490 Hempel’s Zinc Primer 

          – high zinc content, high molecular weight, quick drying phenoxy coating

It is used as a protective primer on steel in severely corrosive environment; for repair of galvanized steel; for repair of Galvosil & other zinc rich coatings.

It complies to SSPC-Paint 20, type 2, level 3.

Max dry exposure 120 °C.

Color : metal grey                   packing : 4L can

 

16900 Hempel’s Silicone Zinc

         – heat resistant zinc pigmented silicone primer

It is used as a primer for long time corrosion protection of steel exposed to high temperature up to 400 °C dry.

Complies with EU Directive 2004/42/EC: subcategory j.

Color : metal grey                   packing : 4L can

 

17360 Hempadur Zinc

          – hard wearing, weather resistant zinc rich epoxy primer

It is VOC compliant, versatile, long term primer on steel for epoxy, vinyl & acrylic coating systems in medium to severely corrosive environments.

It offers cathodic protection of local mechanical damage.

It complies with SSPC-Paint 20, type 2, level 2 and ISO 12944-5.

Dry exposure temperature max 160 °C.

Color : metal grey                   packing : 10L pail

 

1736G Hempadur Avantguard 750

          – activated zinc rich epoxy primer.

It is a versatile primer for long term protection of steel in severely corrosive environments.

Good mechanical strength, also in cyclic temperatures, with improved crack resistance through high flexibility & self-healing of micro cracks.

In compliance with ISO 12944 Part 5, 2007; SSPC Paint 20, 2002, level 2, type II.

Dry exposure temperature max 160 °C.

Color : metal grey                   packing : 10L pail

 

17630 Hempadur

         – abrasion, seawater & oil resistant polyamide adduct cured epoxy

It is used as a self-primed coating for ballast water tanks; primer for atmospheric or in water service, like ship hulls etc.

Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.

Dry exposure temperature max 120 °C

Color : grey; red                      packing : 20L pail

 

17634 Hempadur Quattro

         – anticorrosive universal epoxy paint

It is self primed high performance coating system for atmospheric or in water services, including water ballast tanks & cargo oil tanks to be coated according to IMO-PSPC requirements.

Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Dry Foodstuff.

Tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.

Dry exposure temperature max 120 °C

Color : beige; red                    packing : 5L can; 20L pail

 

35870 Hempadur Multi Strength GF

         – glass flakes reinforced amine adduct cured epoxy coating

It is a hard, impact & abrasion resistant coating with good resistant to sea water, mineral oils, aliphatic hydrocarbons & splashes from petrol & related products.

It is a self-primed, high build coating primarily for areas subject to abrasion and/or highly corrosive environment, like splash zones, jetty piles & working decks.

It can be used as interior lining for crude oil & fuel oil storage tanks.

Dry exposure temperature max 140 °C

Submerged in water (no temperature gradient) max 60 °C

Color : grey; black                  packing : 18L pail

 

45200 Hempadur Hi Build

         – seawater & mineral oil resistant epoxy

It is hard & tough coating resistant to seawater, mineral oils & splashes from petrol & related products.

Tested to Section 175.300 of the Code of Federal Regulations Title 21- Dry Foodstuff.

Dry exposure temperature max 140 °C

Color : white                            packing : 20L pail

 

45540 Hempadur Multi Strength

         – abrasion & corrosion resistant epoxy

It is self-primed, high build coating for maintenance of splash zone, jetty pilings, ship hull & ballast tanks.

It is well suited for application under humid conditions & for early water exposure.

Dry exposure temperature max 140 °C

Submerged in water (no temperature gradient) max 60 °C

Color : off white; black            packing : 18L pail

 

45751 Hempadur Multi Strength

         – abrasion & corrosion resistant polyamide epoxy

It is used as a heavy duty coating for areas exposed to abrasion & aggressive corrosive climate such as ramps, ship hulls, holds of bulk carriers, ballast tanks of chemical carriers.

Dry exposure temperature max 140 °C

Submerged in water (no temperature gradient) max 50 °C

Color : grey; black; red                       packing : 20L pail

 

45881 Hempadur Mastic

          - self primed surface tolerant epoxy

It is polyamide adduct cured, high solids, high build epoxy that forms hard & tough coating.

It has low VOC & good wetting properties.

Dry exposure temperature max 140 °C

Color : wide selection              packing : 5L can; 20L pail

 

46330 Hempatex Hi Build 

         – salt water & chemical resistant chlorinated rubber

It is resistant to salt water, splashes of mineral oils, aliphatic solvents & a wide range of chemicals.

It is self-primed intermediate or finishing coat on steel structures in moderately to severely corrosive environment, including permanently submerged surfaces.

Dry exposure temperature max 80 °C

Color : grey; red                      packing : 20L pail

 

46410 Hempatex Hi Build

         – acrylic resin zinc phosphate paint

It is resistant to salt water, splashes of aliphatic hydrocarbons, animal & vegetable oils.

It is used as a primer, intermediate or finishing coating in Hempatex systems in moderately corrosive environment.

Approved by CSIRO, Australia for carriage of foodstuffs.

Dry exposure temperature max 80 °C

Color : white; grey; red           packing : 20L pail

 

47182 Hempadur

         – anticorrosive modified polyamide adduct cured epoxy

It is used for atmospheric & immersion service as a tie coat between epoxy & physically drying coating.

It may also be used a sealer for old antifoulings.

Dry exposure temperature max 80 °C

Color : yellowish grey             packing : 20L pail

 

47550 Hempadur Mastic

         – self primed low VOC epoxy

It is high solids, high build, tough epoxy coating which has good wetting properties.

It is for atmospheric service as an intermediate or as a primer in coating systems for new construction & maintenance.

It may be used directly on cured zinc silicate (Galvosil products).

Dry exposure temperature max 140 °C

Color : grey                             packing : 20L pail

 

51570 Hempel’s Silvium

         – oleoresinous aluminium paint

It is a general purpose aluminium paint with good light reflection & heat resistant.

It is used as a finishing coat on steel & woodwork exterior & interior in mild to moderately corrosive environment.

It complies with Section 175.300 of Food Additive Regulations (in respect of carriage of dry foodstuffs) of the Code of Federal Regulations.

Dry exposure temperature max 200 °C

Color : light aluminium            packing : 5L can; 20L pail

 

52140 Hempalin Enamel 

          – weather resistant alkyd enamel coating

It is flexible & resistant to salt water, spillage of mineral oil & other aliphatic hydrocarbons.

It is used as finishing coat in alkyd systems on exterior & interior steel & woodwork in mildly to moderately corrosive environment.

Dry exposure temperature max 120 °C

Color : wide selection              packing : 5L can; 20L pail

 

538SG Hempel’s Fast Dry Enamel 

         – quick drying urethane modified alkyd paint

It is used as a general purpose finishing coat, interior & exterior, on steel structures in mild to moderately corrosive atmospheric environment.

Color : white; grey; off white; yellow; cream; blue; green      packing : 20L pail

 

55100 Hempathane Enamel 

         – high gloss acrylic polyurethane enamel

It is used as a glossy decorative finishing coat on a variety of substrates such as steel, aluminium, fibreglass, reinforced polyester, plywood, hardwood etc in severely corrosive atmospheric environment.

Approved as a low flame spread material when used as part of a predefined paint system.

Dry exposure temperature max 120 °C

Color : white; grey; blue; green           packing : 20L pail

 

55210 Hempathane

          - glossy acrylic polyurethane finish

It is used as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness & gloss retention are required.

Complies with European Fire Standard 13501-1; classification B-s1, d0.

Complies with EU Directive 2004/42/EC: subcategory j.

Dry exposure temperature max 120 °C

Color : wide selection                          packing : 5L can; 20L pail

 

55610 Hempathane HS

         – zinc phosphate glossy acrylic polyurethane topcoat

It is used as a VOC compliant, high build finishing coat for protection of structural steel in severely corrosive environment.

May be specified as a one coat “Direct to Metal” system in C2 & C3 environments.

Complies with EC Directive 2004/42/EC: subcategory j.

Dry exposure temperature max 120 °C

Color : white; light grey; grey; black; yellow; green; red        packing : 20L pail

 

56360 Hempatex Enamel

          – acrylic resin & non-chlorinated plasticizer finish coat

It is used as an interior & exterior finish coat in Hempatex systems in moderately to severely corrosive environment.

Tested for non contamination of grain cargo at the Newcastle Occupational Health.

Dry exposure temperature max 80 °C

Color : selected colors                        packing : 20L pail

 

56540 Hempel’s Hi Vee 

         – day light reflective acrylic paint

It is a non-hiding, strongly day light reflecting acrylic paint with fluorescent pigments which give intense color impression & high visibility.

It is for life saving equipment & warning purposes such as protruding or moving objects.

Dry exposure temperature max 80 °C

Color : orange                                     packing : 5L can

 

56914 Hempel’s Silicone

         – heat resistant aluminium pigmented polysiloxane paint

It is for long term protection of hot pipelines, exhaust pipes, smoke stacks & other hot surfaces.

Complies with EU Directive 2004/42/EC: subcategory i.

Dry exposure temperature max 600 °C

Color : light aluminium                        packing : 4L can

 

56940 Hempel’s Silicone Acrylic

          – heat resistant acrylic modified polysiloxane paint

It is for long term protection of hot pipelines, exhaust pipes, smoke stacks & other hot surfaces.

Dry exposure temperature max 200 °C

Color : light aluminium; light grey       packing : 5L can; 20L pail

56990 Hempel Versiline CUI

         – MIO pigment inorganic copolymer coating

It cures for form an inert polymer matrix able to resist high temperatures & thermal shock / cycling in dry or dry/wet service.

It is for long term protection of hot pipework, equipment & other hot surfaces.

It is applied directly onto the steel substrate.

Conforms to NACE SP0198 – 2010 systems SS-5 and CS-6.

Dry or dry/wet exposure temperature max 650 °C

Color : dark grey                                 packing : 5L can

 

675SG Hempel’s Anti Slint Powder

          – anti skid dried silica sand

It is used to obtain anti-skid properties on decks & other areas.

Color : grey                                         packing : 2.5L can

 

72900 Hempel’s Antifouling Olympic+

          - acrylic binder self polishing antifouling paint

It doesn’t contain organotin compounds acting as biocides.

It is for both new buildings & maintenance of underwater hull & boottop for up to 36 months of dry docking interval.

It complies with the International Convention on the Control of Harmful Antifouling System on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Color : black; red; brown                    packing : 20L pail

 

72950 Hempel’s Antifouling Olympic+

          - acrylic binder self polishing antifouling paint

The patented microfibers give best-in-class mechanical strength to avoid cracking & peeling.

It is for both new buildings & maintenance of underwater hull & boottop for up to 36 months of dry docking interval.

It complies with the International Convention on the Control of Harmful Antifouling System on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Color : black; red; brown                    packing : 20L pail

 

73900 Hempel’s Antifouling Oceanic+

          - zinc carboxylate binder SPC antifouling paint

It delivers strong predictable antifouling protection through a very stable self polishing mechanism, which is based on chemical hydrolysis & a strong 3 component biocide package.

It is for both new buildings & maintenance of underwater hull & boottop for up to 60 months of dry docking interval.

It complies with the International Convention on the Control of Harmful Antifouling System on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Color : red                                           packing : 20L pail

 

76110 Hempel’s Antifouling Classic

         – soluble matrix type antifouling paint

It doesn’t contain organotin compounds acting as biocides & complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Color : red                                           packing : 5L can; 20L pail

 

78950 Hempel’s Antifouling Globic 9000

          – nano acrylate technology premium high solid SPC antifouling paint

It is used as an antifouling for bottom & boottop on vessels operating in deep sea trade at medium to high speed & high activity with short idle periods.

It doesn’t contain organotin compounds acting as biocides & complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).

Color : red                                           packing : 20L pail

 

85671 Hempadur

         – water & chemical resistant amine adduct cured novolac coating

It is used as an interior tank lining, pipelines etc for hot water, brine, crude oil, including potable water tanks.

External coating for the protection of insulated (CUI) & uninsulated process pipework & vessels including cryogenic conditions.

In accordance with ARAMCO’s specification APCS 2A, 2B and 2C.

Conforms to Norsok M-501, system no. 3.

Approved by Water Research Centre (WRAS), Great Britain, for potable water up to 23 °C.

Complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuffs.

Dry exposure temperature max 205 °C

In water (max gradient 15 °C): max 95 °C

Color : grey; red                                  packing : 20L pail

 

99610 Hempel’s Tool Cleaner

          – blended strong solvents for cleaning tools

It doesn’t contain chlorinated solvent.

It is for cleaning of brushes, paint rollers, spray equipment & other tools which have been used for mixing or application of Hempadur products.

Color : clear                                        packing : 5L can

 

Please contact us for supply of Hempel Paint, Hempel coating (antifouling, marine paint, Galvosil, Hempadur, Hempadur Avantguard, Glass Flake, Hempadur Mastic, Hempadur Quattro, Hempalin, Hempaquick, Hempatex, Hempathane, Hempaxane, Hempinol, Olympic, Novolac, Silvium, Versiline) in Jakarta, Bandung, Bogor, Cianjur, Sukabumi, Pelabuhan Ratu, Cilacap, Tasikmalaya, Bekasi, Karawang, Cikampek, Cirebon, Indramayu, Lamongan, Gresik, Tuban, Semarang, Surabaya, Malang, Jember, Yogyakarta, Solo, Banyuwangi, Tangerang, Serang, Anyer, Cilegon, Merak, Lampung, Palembang, Padang, Bengkulu, Jambi, Pekanbaru, Dumai, Bangka, Belitung, Batam, Medan, Lhokseumawe, Aceh, Sumatra, Bali, Balikpapan, Samarinda, Bontang, Banjarmasin, Pontianak, Sangatta, Makassar, and other parts of Indonesia.

Website Builder